Guide to the selection and purchase of Kaoru heat exchange
KAORI was established in 1970 with the main goal of producing new technologies and products of a global quality. Based on the continuous research and development of new technologies in 1994, the company started manufacturing plate heat exchangers and in 1995 failed to acquire Certification of ISO 9001 Quality Management System. KAORI, based on technical knowledge on heat transfer, expanded heat exchangers, has obtained various certifications and patents in the heat exchanger section. Due to the high quality of its products, it became one of the largest heat exchanger manufacturers in the world for a short time. In order to meet the increasing global demand in 2002 and 2005, KAOHSIUNG and NINGBO have established factories to increase production capacity. Currently KAORI plate heat exchangers are Taiwan’s No. 1 brand, exported to more than 50 countries worldwide.
Important Notes on the use of the TEPCO Screen Heat Exchanger:
1. Due to the precipitated salts in the aftermath of heating, in order to increase the efficiency of these types of converters, the use of a suitable stabilizer in the cold water inlet circuit is necessary.
2. In addition to the necessity of using the water hardening device, the installation of the nut nut and the valve flange on all water inlet and outlet pipes from the heat exchanger for periodic and acid cleaning services is required.
3. For the installation of heat exchangers, there is a need for a one-way valve and two filters (filters) as well as a linear hardener (magnetic, electronic, etc.) that, in the absence of the above requirements in the project relative to the order Buy these side products, in proportion to the size of the tube.
4. When purchasing the converter, in addition to calculating the capacity, the thermal surface, the type of converter, dimensions and sex, the issue of the pressure drop should also be considered, because due to the amount of pressure drop in the converter and also in the fluid transfer line, the circulator pump Set the right one.
Applications of Tepco plate heat exchangers
1. Supply of spa water in buildings
2. Floor heating
3. Snow melt heating in parking lots and sidewalks
4. Swimming Pool and Jacuzzi
5. As evaporator and condenser in chillers
6. As an economizer or subcooler for transferring the heat of the suction line and the liquid line
7. Super heater as a compressor gas outlet and reducing the dimensions of the condenser in the device
8. As air in the cooler systems
9. As an intermediate heat exchanger for cooling in industrial processes by cooling tower
Advantages of using TAPCO plate transducers:
1. Lower weight and hence ease of carrying.
2. Reduced costs due to lower initial cost, less piping and fuel economy of 30%.
3. Smaller dimensions and use in projects with limited space and also reduce engine room dimensions.
4. Increase efficiency due to lower temperature difference on both sides of the converter.
5. High corrosion resistance due to the use of stainless steel 316
6. Strength in very high operating pressure and temperature due to welding of vacuum transformer plates
7. The self-cleansing property of the converter is due to the creation of turbulent flow by the slots in the pages minimizing the amount of deposition of the converter.
8. Reducing the possibility of frost due to flow turbulence
9. High Performance Pressure
After-sales warranty and after-sales service TAPCO plate heat exchanger:
The heat pump plate heat exchanger has a one-year warranty and 10 years of after-sales service.
